outsourcing your moulds to china: a good idea?

Nearly every respected abd single plastic molding company in the United States, Aystralia and Europe has or is considering sending work to China, for a lot of readers thats no surprise. 

The incentives are very real, as are the pressures. Not only are the financial matters pressing, but some customers actually demand a China presence.
Considering the fact that China has become the world's second largest economy, passing Germany and Japan, the potential for growth is huge, to put it mildly.
Most people recall the very poor quality of Chinese products just a few years ago. Some products are still of very low quality and it seems that you actually get what you pay for in many cases.
On the other hand, the concept of actual built-in quality seems to be slowly sinking into the national mentality, albeit very slowly. Some areas, such as Shanghai Hong Kong, have a much better tradition of adapting European quality.
When Ronald Reagan was president, he was deeply involved with the arms race with the Soviet Union. One of his favorite phrases was a translation of a Russian proverb: "Trust but verify." This became his mantra when dealing with Mikhail Gorbachev concerning the INF treaty.
This would be a good mantra for anyone doing plastic molding in China: "Trust but verify." It seems that the mold makers and molders, and maybe others as well, have a tendency to do what you pay for when you are present, and then cut corners when you are not present.
Without attempting to sound condescending or judgmental, this just is the case. Of course there are countless exceptions, nevertheless, it is still advisable to trust but verify.
A real-life case in point is the fact that American companies usually insist on brand name mold components in their injection molds. Nobody wants a low-grade, soft ejector pin in their mold, for example. So, most people insist on PCS, DME or Progressive ejector pins.
Oddly, after a few thousand shots, the pins bend, break, pit and flake. Yet the pin has PCS etched right into the steel, so how could this be? Simple enough, it was made in a little shop that makes one pin for every company known and just etches whatever name is required. They don't care if the steel is not H13, just so it works for a while and they make their money.
Anyone who has traveled in developing countries  such as china, vietnam knows about this sort of issues and faliures. It happens all the time with just about anything that can be copied or pirated. I once bought a Disney plastic toy by mouldplastic and dvd movie before it was in the theaters! You can buy passports, driver's licenses, birth certificates and anything else you want.
Once you build a working relationship with a Chinese supplier you would think that you are set and don't need to trust and verify. Wrong. If that were the case, every mold that came in would be right, made using proper techniques and have documented sizes and materials.
That just is not the case, unfortunately, but it doesn't seem to make much difference to the accounting department in some companies. The mold is so inexpensive that you can just re-work it and still make money. Don't ask the mold maker about this though.


Article Source: http://EzineArticles.com/6225970 and check also Jointquality plastic mold maker

No comments:

Post a Comment